Court Repair And Restoration Questions

Many courts can be repaired when damage is limited to the surface layer, cracks, peeling coating, or worn lines. If the base is sinking, badly broken, or holding water in volume, the builder will say so and prepare a reconstruction scope instead.

Typical steps are pressure washing, crack routing and filling, patching low or damaged areas, applying an acrylic colour coat, and repainting line markings. The exact scope depends on the court’s condition and base material, and every step is listed separately in the estimate.

Not always. A new coating does not correct a drainage or slope problem on its own. Low spots are levelled with patching compound before the colour coat goes on, but deeper drainage issues need separate repair first.

Yes. Virginia freeze-thaw cycles force water into cracks each winter, widening them season by season. A crack that costs a few hundred dollars to fill today can spread into a slab-level failure that requires full court demolition and reconstruction.

The on-site evaluation checks crack depth, base stability, and drainage before any work is scoped. If sub-base movement is found, the builder flags it in writing and prepares a rebuild estimate so you have the full picture before committing.

A properly routed, filled, and coated surface repair on a stable base can last many years. Longevity depends on the base condition, traffic load, and how quickly any new surface damage is addressed. The builder will note any factors that could shorten the repair’s life.